Data Sheet

Product Code:

SED-BALUN-HD504

Summary:

Real-time transmission over UTP cat5e/6, No power required, Compatible with all HD-TVI/CVI/AHD/CVBS analog cameras, Wave Filter, Anti-Static, Lightning protection

The SED-BALUN-HD504 video balun hub is a passive (non-amplified) device that allows the transmission of real-time CCTV HD video signal via cost-effective Unshielded Twisted Paired (UTP) cable. The SED-BALUN-HD504 is compatible with all HD-TVI, HD-CVI, AHD and CVBS analog cameras.

The SED-BALUN-HD504 supports pluggable screw terminal or RJ45 connections. Used with single channel HD passive video transmitter, the SED-BALUN-HD504 is capable to receive 4 channel live CCTV HD video signal from camera end via one UTP cable.

The superior interference rejection and low emissions of the SED-BALUN-HD504 allow video signals to coexist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of a shared or existing cable plant. The SED-BALUN-HD504 is built-in surge suppressor to protect video equipment against damaging voltage spikes and provide noise immunity to ensure quality signals without disturbing "hum-bars".


Wire and Cable Recommendations

The SED-BALUN-HD504 is recommended to use with Unshielded Twisted Paired (UTP) wiring from 24AWG through 22AWG.Individually shielded pairs should be avoided, as they reduce the operating range of the systems drastically. Multi-pair cable (25-pair or more) with an overall shield are acceptable. Video signals can coexist in the same wire bundle as telephone, datacom, or low-voltages power circuits. While video may be routed through telephone punch-down block terminals, any bridge-taps, also called T-taps and any resistive, capacitive or inductive devices MUST BE removed from the pair.

For more specific information regarding wire types, gauges and proper installation techniques, please contact us for technical assistance.

 

...

  • Real-time transmission over UTP cat5e/6
  • No power required
  • Compatible with all HD-TVI/CVI/AHD/CVBS analog cameras
  • Color video max up to 190m (623ft) for HD-TVI 720P camera
    Color video max up to 190m (623ft) for HD-TVI 1080P camera
    Color video max up to 200m (656ft) for HD-TVI 3MPX camera
  • Color video max up to 440m (1443ft) for HD-CVI 720P camera
    If you adjust saturation of DVR, max up to 470m (1541ft)
    Color video max up to 230m (754ft ) for HD-CVI 1080P camera
    Color video max up to 230m (754ft ) for HD-CVI 4MPX camera
  • Color video max up to 320m (1049ft) for HD-AHD 720P camera
    Color video max up to 320m (1049ft) for HD-AHD 960P camera
    Color video max up to 250m (820ft) for HD-AHD 1080P camera
    Color video max up to 180m (590ft) for HD-AHD 3MPX camera
    Color video max up to 200m (656ft ) for HD-AHD 4MPX camera
    Color video max up to 200m (656ft ) for HD-AHD 5MPX camera
  • Color video max up to 400m (1312ft) for CVBS camera
  • Female BNC connector
  • RJ45 and detachable terminal blocks for UTP cat5e/6
  • Built-in solid state TVS (Transient Voltage Suppressors) for surge protection
  • Wave Filter Design, Anti-Static Design
  • Lightning protection design Grade: III
  • 60 dB crosstalk and noise immunity
  • Exceptional interference rejection
  • Compact size and easy installation
  • Rack, wall mountable and desk installation with 4 rubber feet
  • Black galvanized housing
ModelSED-BALUN-HD504
Product Name4 Channel HD Passive Video Balun
Applied DevicesCCTV cameras, monitors, DVR, switchers, IP encoders, and other CCTV equipment
VideoVideo FormatHD-TVI/CVI/AHD/CVBS
Operating FrequencyDC to 42MHz
Max DistanceHD-CVI 720P 440m(1443ft)HD-CVI 1080P 230m(754ft)HD-CVI 4MPX 230m(754ft) 
HD-TVI 720P 190m(623ft)HD-TVI 1080P 190m(623ft)HD-TVI 3MPX 200m( 656ft) 
HD-AHD 720P 320m(1049ft)HD-AHD 960P 320m(1049ft)HD-AHD 1080P 250m(820ft)HD-AHD 3MPX 180m(590ft)HD-AHD 4MPX 200m(656ft )HD-AHD 5MPX 200m(656ft )
Common-mode/Differential-mode rejection15KHz to 42MHz  60 dB typ
ImpedanceCoax:female BNC 75ohm unbalanced
UTP:screw terminal block or RJ45 100ohm balanced
Attenuation1.5 dB typ  Max
Wire TypeNetwork WiringOne Unshielded Twisted Pair (for each video signal) 24-16 AWG (0.5-1.31mm)
Category TypeUTP cat 5e/6
Impedance100 +/- 20 ohms
DC Loop Resistance52 ohms per 1,000ft (18 ohms per 100m)
Differential Capacitance19 pF/ft max (62 pF/m max)
PowerNo external power required
ConnectorVideo input/outputFemale BNC connector
Video output/inputpluggable screw terminal block and RJ45 for UTP ( select one connection)
ProtectionSurge Protectionrenewable solid state surge protection
AntistaticYES
Video Input2KV(common mode), 10/700us IEC61000-4-5/1955(GB/T 1726, 5-1999)
Video Output2KV(different mode), 10/700us IEC61000-4-5/1955(GB/T 1726, 5-1999)
MechanicalDimensions(L*W*H)BNC connector & mounting bracket excluded
180*85*32mm
HousingGalvanized
Body ColorBlack
Net Weight480g
EnvironmentalOperating Temperature-20deg. ~ 70deg. C
Relative Humidity0~95% (non-condensing)
Storage Temperature-40deg. ~ 150deg. C
  • Security Monitoring System
  • Multimedia Network Teaching System
  • Medical Monitoring Display System
  • Industrial Automation Control System
  • Banking, securities, financial information display system
  • Remote Network Server Monitoring
  • Department Store Security
  • Casino Security
  • Hospitals, Airports and banks
  • School Campuses

Application Diagram

...

Note

  1. The actual transmission distance will vary according to specific camera, DVR and on-site environment
  2. Please make sure to install transmitter at camera side and receiver at DVR side to achieve best video quality
  3. If you adjust saturation of DVR, video transmission distance could be farther (HD-CVI 720P: max up to 470m(1541ft)
  4. If chromatic aberration occurs, please also adjust saturation, the picture will recover perfectly automatically.
  5. The device is not waterproof and not to be used at outdoors

 


Write a review

Please login or register to review